Short answer: Amazon treats your gift box as the unit. It must be six-sided and hold its shape under pressure, carry one scannable FNSKU barcode on a flat face, be sealed or labelled "Sold as set" if it holds several items, and ship in cartons no larger than 36 × 25 × 25 inches and no heavier than 50 lb.

The rules below are quoted from Amazon's US Seller Central help pages Product packaging requirements and Shipping and routing requirements, read on October 31, 2026. Amazon updates them; check both pages before you book a shipment.

Rules for the gift box itself (the unit)

RuleWhat Amazon saysWhat it means for a gift box
Boxed unitsMust be six-sided and must not easily give way when pressure is applied to any of the sidesRigid lid-and-base, magnetic and drawer boxes qualify; a tray without a lid or an open display box does not
Heavy unitsProducts over 10 lb must be boxed in a double-wall corrugated boxLarge hampers and wine sets: plan a corrugated over-box
Fragile contentsOver-boxing is required for fragile items that failed a 3-foot drop test after bubble wrap was appliedGlass candles, perfume and ceramics: drop-test a packed sample before production
BarcodeEach unit needs an exterior scannable barcode or label; do not apply it to a corner or curveKeep a flat, plain panel for the FNSKU label, usually the base; avoid foil or soft-touch there if your labels will not stick
Other barcodesRemove, cover or render unscannable any existing scannable barcodes on the outsideIf a retail barcode is printed on the box, plan where the FNSKU covers it
SetsMust be marked as sets, e.g. "Sold as set" or "This is a set. Do not separate", and sealed so they cannot be separatedGift sets in one box: print or label the set notice and seal the lid
Loose packagingUnits in packaging that is not secure, such as loose sleeves, must be bagged or secured with a non-adhesive band or removable tapeSleeve-and-tray and belly-band packs need a band or removable tape so the sleeve cannot slide off

A magnetic lid holds itself shut, but Amazon judges the unit as it arrives. If your lid can lift in handling, secure it the same way as a loose sleeve.

Rules for the shipping carton

ItemAmazon requirement
Maximum size36.0 in (L) × 25.0 in (W) × 25.0 in (H); width and height may not exceed 25 in
Maximum weight50 lb per box; up to 65 lb only for a single item over 50 lb, with a "Team Lift" label on the top and sides
Jewelry and watchesBoxes containing jewelry or watches must not exceed 40 lb
Carton strength200 lb per square inch burst strength
Cushioning2 inches of packing material around and between items, not needed when shipped in the manufacturer's case pack
Case packsSame SKU and condition, equal quantity in every box, packed by the manufacturer; maximum 150 units per case
LabelsEach box needs its own FBA Box ID label; remove old labels and barcodes from reused boxes

Worked example: planning a case pack

Take a magnetic gift box with a 200 × 200 × 80 mm exterior (about 7.9 × 7.9 × 3.2 in). Three across and two deep gives a layer of about 23.6 × 15.7 in; four layers stack to about 12.6 in. That is 24 units in a carton of roughly 25 × 17 × 14 in once you add the carton walls, inside the 36 × 25 × 25 in limit. If each packed unit weighs 1.2 lb (an example, not a measured figure), the carton is about 29 lb plus the carton, under 50 lb. Use the box measuring guide for the exterior and the dimensional weight calculator to check courier billing.

What to put in your packaging RFQ for FBA

  1. That the boxes are for FBA, and which face will carry the FNSKU label (left plain, no foil or soft-touch).
  2. Whether the box is a set that needs a "Sold as set" notice printed on it.
  3. How the lid or sleeve is secured in transit (magnet strength, band, removable tape).
  4. Units per master carton and the carton size and weight you need to stay within Amazon's limits.
  5. Whether the contents are fragile, so a drop test can be planned on the pre-production sample.

Formats and minimums: rigid and magnetic boxes start at 100 pcs per size. Orders below 500 pcs carry a noticeably higher unit price, so we recommend 500 pcs or more. Sampling takes 3–5 days and production 12–15 days. Related: 3PL-ready packaging, preventing shipping damage.

Box Formats That Work for FBA

Six-sided rigid formats with a flat base panel for the FNSKU label.

Ready to price one of these? Send a quote request — the reply includes a free 3D mockup.

Frequently Asked Questions

Does Amazon FBA accept rigid gift boxes?
Yes, if the box is six-sided, does not give way when pressed on any side, carries one scannable FNSKU barcode on a flat face and is sealed or labelled as a set when it holds several items.
What is the maximum carton size for FBA in 2026?
36 x 25 x 25 inches and 50 lb, per Amazon's Shipping and routing requirements read on October 31, 2026. A single item over 50 lb can go up to 65 lb with Team Lift labels; jewelry and watch cartons are limited to 40 lb.
Do gift boxes need a drop test for FBA?
Amazon requires over-boxing for fragile items that fail a 3-foot drop test after bubble wrap. Drop-test a packed pre-production sample if the contents are glass, ceramic or liquid.
Where should the FNSKU label go on a gift box?
On a flat panel, not a corner or curve, and over any other scannable barcode on the outside. Keep that panel free of foil or soft-touch if your labels do not stick to those finishes.

LuxoPack is a custom rigid box factory in Shenzhen. Formats: magnetic gift boxes, rigid gift boxes, all products. Related reading: Gift Box Size Guide, How to Measure a Box, Dimensional Weight Calculator, MOQ Guide.